|
3/4x3/4x3/4BRS Barb Tee
3/4", Lead Free Brass Barb Insert Tee, For Connecting 3 Pieces Of 3/4" Cross Link Polyethylene Pex Tubing, Secure Barb Ends Of Fitting To Pex Pipe, Secure Barb Ends Of Fittings To Pex Pipe With TV #608-826 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
View Details
|
137602 |
3/4x3/4x3/4BRS Barb Tee |
2 |
4.49 |
/ EA |
UC370LFA |
|
|
3/4x3/4x1/2BRS Barb Tee
3/4" x 3/4" x 1/2", Lead Free Brass Barb Insert Tee, To Make A 1/2" Branch From A 3/4" Run Of Cross Link Polyethylene Pex Tubing, Secure The 1/2" Barb End Of Fitting To 1/2" Pex Pipe With TV #608-933 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Secure 3/4" Barb Ends Of Fitting To 3/4" Pex Pipe With TV #608-826 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
View Details
|
137603 |
3/4x3/4x1/2BRS Barb Tee |
3 |
4.49 |
/ EA |
UC412LFA |
|
|
3/4" BRS Barb Ins Plug
3/4" Lead Free Brass Barb Insert Plug, For Pressure Testing 3/4" Cross Link Polyethylene Pex Tubing, Secure 3/4" Barb End Of Fitting To 3/4" Pex Pipe With TV #608-826 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
View Details
|
137604 |
3/4" BRS Barb Ins Plug |
2 |
2.29 |
/ EA |
UC518LFA |
|
|
10PK 1/2x1/2MPT Adapter
10 Pack, 1/2" Lead Free Brass Barb Insert x 1/2" Male Pipe Thread Adapter, For Connecting 1/2" Cross Link Polyethylene Pex Tubing To 1/2" Female Iron Pipe Thread Pipe End Or Fitting, Secure Fittings To Pex Pipe With TV #608-933 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
View Details
|
137607 |
10PK 1/2x1/2MPT Adapter |
1 |
27.99 |
/ EA |
UC120LFA10 |
|
|
10PK1/2BarbBRS Coupling
10 Pack, 1/2", Lead Free Brass Barb Insert Coupling, For Connecting 2 Pieces Of 1/2" Cross Link Polyethylene Pex Tubing, Secure Barb Ends Of Fittings To Pex Pipe With TV #608-933 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
View Details
|
137626 |
10PK1/2BarbBRS Coupling |
2 |
16.99 |
/ EA |
UC008LFA10 |
|
|
10PK1/2Barb Insert Tee
10 Pack, 1/2", Lead Free Brass Barb Insert Tee, For Connecting 3 Pieces Of 1/2" Cross Link Polyethylene Pex Tubing, Secure Barb Ends Of Fittings To Pex Pipe With TV #608-933 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
View Details
|
137627 |
10PK1/2Barb Insert Tee |
2 |
21.99 |
/ EA |
UC362LFA10 |
|
|
10PK1/2Barb Inser Elbow
10 Pack, 1/2", Lead Free Brass Barb Insert Elbow, For Connecting 2 Pieces Of 1/2" Cross Link Polyethylene Pex Tubing, Secure Barb Ends Of Fittings To Pex Pipe With TV #608-933 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
View Details
|
137629 |
10PK1/2Barb Inser Elbow |
3 |
19.99 |
/ EA |
UC248LFA10 |
|
|
10PK3/4Barb Inser Elbow
10 Pack, 3/4", Lead Free Brass Barb Insert Elbow, For Connecting 2 Pieces Of 3/4" Cross Link Polyethylene Pex Tubing AtA 90 Degree Angle, Secure Barb Ends Of Fitting To Pex Pipe, Secure Barb Ends Of Fittings To Pex Pipe With TV# 608826 Cinch Clamps & TV# 608743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, MeetsThe New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable WaterContains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
View Details
|
137631 |
10PK3/4Barb Inser Elbow |
1 |
24.99 |
/ EA |
UC256LFA10 |
|
|
1/2x1/2 Coupling
1/2" x 1/2", Lead Free Coupling, Sharkbite Push Fit Fittings For Use With Copper Tubing CTS, CPVC & Pex With Integral Tube Liner Included, Constructed Of DZR Brass, Certified To 200 PSI & 200 Degrees Fahrenheit, Design Certified To ASSE 1061/NSF61 Standards, Meets UPC, IPC & CUPC Requirements, Fittings Are Listed With IAPMO & Are Certified For Use On Potable & Hydronic Water Distribution, Certified For Underground Applications & As A Manufactured Joint Without The Need For Access Panels, Lead Free Compliant To Federal Law 111-380, Bagged.
View Details
|
143001 |
1/2x1/2 Coupling |
30 |
9.99 |
/ EA |
UR008A |
|
|
3/4x3/4 Coupling
3/4" x 3/4", Lead Free Coupling, Sharkbite Push Fit Fittings For Use With Copper Tubing CTS, CPVC & Pex With Integral Tube Liner Included, Constructed Of DZR Brass, Certified To 200 PSI & 200 Degrees Fahrenheit, Design Certified To ASSE 1061/NSF61 Standards, Meets UPC, IPC & CUPC Requirements, Fittings Are Listed With IAPMO & Are Certified For Use On Potable & Hydronic Water Distribution, Certified For Underground Applications & As A Manufactured Joint Without The Need For Access Panels, Lead Free Compliant To Federal Law 111-380, Bagged.
View Details
|
143004 |
3/4x3/4 Coupling |
13 |
10.49 |
/ EA |
UR016A |
|
|
3/4x1/2 Reduc Coupling
3/4" x 1/2", Lead Free Reducing Coupling, Sharkbite Push Fit Fittings For Use With Copper Tubing CTS, CPVC & Pex With Integral Tube Liner Included, Constructed Of DZR Brass, Certified To 200 PSI & 200 Degrees Fahrenheit, Design Certified To ASSE 1061/NSF61 Standards, Meets UPC, IPC & CUPC Requirements, Fittings Are Listed With IAPMO & Are Certified For Use On Potable & Hydronic Water Distribution, Certified For Underground Applications & As A Manufactured Joint Without The Need For Access Panels, Lead Free Compliant To Federal Law 111-380, Bagged.
View Details
|
143009 |
3/4x1/2 Reduc Coupling |
3 |
10.99 |
/ EA |
UR058A |
|
|
1/2x1/2FIP Connector
1/2" x 1/2" Female Iron Pipe, Lead Free Connector, Sharkbite Push Fit Fittings For Use With Copper Tubing CTS, CPVC & Pex With Integral Tube Liner Included, Constructed Of DZR Brass, Certified To 200 PSI & 200 Degrees Fahrenheit, Design Certified To ASSE 1061/NSF61 Standards, Meets UPC, IPC & CUPC Requirements, Fittings Are Listed With IAPMO & Are Certified For Use On Potable & Hydronic Water Distribution, Certified For Underground Applications & As A Manufactured Joint Without The Need For Access Panels, Lead Free Compliant To Federal Law 111-380, Bagged.
View Details
|
143017 |
1/2x1/2FIP Connector |
6 |
9.29 |
/ EA |
UR072A |
|
|
3/4x3/4FIP Connector
3/4" x 3/4" Female Iron Pipe, Lead Free Connector, Sharkbite Push Fit Fittings For Use With Copper Tubing CTS, CPVC & Pex With Integral Tube Liner Included, Constructed Of DZR Brass, Certified To 200 PSI & 200 Degrees Fahrenheit, Design Certified To ASSE 1061/NSF61 Standards, Meets UPC, IPC & CUPC Requirements, Fittings Are Listed With IAPMO & Are Certified For Use On Potable & Hydronic Water Distribution, Certified For Underground Applications & As A Manufactured Joint Without The Need For Access Panels, Lead Free Compliant To Federal Law 111-380, Bagged.
View Details
|
143019 |
3/4x3/4FIP Connector |
4 |
10.99 |
/ EA |
UR088A |
|
|
1/2x1/2MIP Connector
1/2" x 1/2" Male Iron Pipe, Lead Free, Straight Connector, Sharkbite Push Fit Fittings For Use With Copper Tubing CTS, CPVC & Pex With Integral Tube Liner Included, Constructed Of DZR Brass, Certified To 200 PSI & 200 Degrees Fahrenheit, Design Certified To ASSE 1061/NSF61 Standards, Meets UPC, IPC & CUPC Requirements, Fitting Are Listed With IAPMO & Are Certified For Use On Potable & Hydronic Water Distribution, Certified For Underground Applications & As A Manufactured Joint Without The Need For Access Panels, Lead Free Compliant To Federal Law 111-380, Bagged.
View Details
|
143027 |
1/2x1/2MIP Connector |
4 |
9.29 |
/ EA |
UR120A |
|
|
3/4x3/4MIP Connector
3/4" x 3/4" Male Iron Pipe, Lead Free, Straight Connector, Sharkbite Push Fit Fittings For Use With Copper Tubing CTS, CPVC & Pex With Integral Tube Liner Included, Constructed Of DZR Brass, Certified To 200 PSI & 200 Degrees Fahrenheit, Design Certified To ASSE 1061/NSF61 Standards, Meets UPC, IPC & CUPC Requirements, Fitting Are Listed With IAPMO & Are Certified For Use On Potable & Hydronic Water Distribution, Certified For Underground Applications & As A Manufactured Joint Without The Need For Access Panels, Lead Free Compliant To Federal Law 111-380.
View Details
|
143030 |
3/4x3/4MIP Connector |
4 |
10.99 |
/ EA |
UR134A |
|
