|
4 Port Multi-Port Tee
Sharkbite 3/4" Pex Barb x 1/2" D Closed Poly 4 Port Tee. Allows for easy connection to PEX with improving install efficiencies and reducing the risk of installation errors. Minimizes the risk of leaks by eliminating excess connection points.
View Details
|
114543 |
4 Port Multi-Port Tee |
2 |
15.49 |
/ EA |
UPMPT4C |
|
|
1/2x1/2Poly Pex Adapter
1/2" Poly Alloy Barb Insert x 1/2" Poly Alloy Male Pipe Thread Adapter, For Cross Link Polyethylene Tubing For Hot & Cold Water, Use With True Value #608-933 Cinch Clamp, Need Cinch Tool True Value #608-743 Or Copper Crimp Rings On Cross Link Polyethylene Pex Tubing, After Crimping You Can Immediately Test Each Fitting To Well Over 100 PSI, NSF Listed Poly Alloy Inserts, Replacement For Brass Pex Insert Fittings To Conform To California Ab1953 Low Lead & Vermont S152 Low Lead Laws.
View Details
|
115874 |
1/2x1/2Poly Pex Adapter |
1 |
1.79 |
/ EA |
UP120A |
|
|
3/4x3/4Poly Pex Adapter
3/4" Poly Alloy Barb Insert x 3/4" Poly Alloy Male Pipe Thread Adapter, For Cross Link Polyethylene Tubing For Hot & Cold Water, Use With True Value #608-933 Cinch Clamp, Need Cinch Tool True Value #608-743 Or Copper Crimp Rings On Cross Link Polyethylene Pex Tubing, After Crimping You Can Immediately Test Each Fitting To Well Over 100 PSI, NSF Listed Poly Alloy Inserts, Replacement For Brass Pex Insert Fittings To Conform To California Ab1953 Low Lead & Vermont S152 Low Lead Laws.
View Details
|
115878 |
3/4x3/4Poly Pex Adapter |
2 |
2.49 |
/ EA |
UP134A |
|
|
3/4x3/4x1/2Poly Pex Tee
3/4" x 3/4" x 1/2" Poly Alloy Barb Insert Pex Tee, For Cross Link Polyethylene Tubing For Hot & Cold Water, Use With True Value #608-933 Cinch Clamp, Need Cinch Tool True Value #608-743 Or Copper Crimp Rings On Cross Link Polyethylene Pex Tubing, After Crimping You Can Immediately Test Each Fitting To Well Over 100 PSI, NSF Listed Poly Alloy Inserts, Replacement For Brass Pex Insert Fittings To Conform To California Ab1953 Low Lead & Vermont S152 Low Lead Laws.
View Details
|
115891 |
3/4x3/4x1/2Poly Pex Tee |
7 |
1.99 |
/ EA |
UP412A |
|
|
1/2x1/2Pex Swiv Adapter
1/2" Poly Alloy Barb Insert x 1/2" Female Iron Pipe Swivel Pex Straight Adapter, For Cross Link Polyethylene Tubing ForHot & Cold Water, Use With True Value #608-933 Cinch Clamp, Need Cinch Tool True Value #608-743 Or Copper Crimp Rings On Cross Link Polyethylene Pex Tubing, After Crimping You Can Immediately Test Each Fitting To Well Over 100 PSI, NSF Listed Poly Alloy Inserts, Replacement For Brass Pex Insert Fittings To Conform To California Ab1953 Low Lead & Vermont S152 Low Lead Laws.
View Details
|
115900 |
1/2x1/2Pex Swiv Adapter |
1 |
2.49 |
/ EA |
UP526A |
|
|
3/4" Poly Pex End Plug
3/4" Poly Alloy Barb Insert Pex End Plug, For Cross Link Polyethylene Tubing For Hot & Cold Water, Use With True Value #608-933 Cinch Clamp, Need Cinch Tool True Value #608-743 Or Copper Crimp Rings On Cross Link Polyethylene Pex Tubing, After Crimping You Can Immediately Test Each Fitting To Well Over 100 PSI, NSF Listed Poly Alloy Inserts, Replacement ForBrass Pex Insert Fittings To Conform To California Ab1953 Low Lead & Vermont S152 Low Lead Laws.
View Details
|
115908 |
3/4" Poly Pex End Plug |
2 |
1.29 |
/ EA |
UP518A |
|
|
1/2x1/2Male SWT Adpater
1/2" Brass Pex Barb x 1/2" Male, Lead Free, Sweat Adapter, Makes A Sweat Transition From Copper Pipe To Pex Tubing & Connected With Stainless Steel Cinch Clamps & Cinch Tool TV #608-743, ASTM F-876, ASTM F-877 To SDR-9 Dimensional Standards, NSF 14 & 61 For Use In Potable Water Systems, CSA B137.5 Standards, NSF CL-R Certified For Use In Hot Water Systems Where Chlorinated 140 Degrees Fahrenheit Hot Water Can Be Constantly Re-Circulated, The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 1/4 Of 1 Percent, 0.25%, Of Lead By Weight, Meets AB1953 California & VT S152 Vermont Low Lead Restrictions.
View Details
|
122650 |
1/2x1/2Male SWT Adpater |
3 |
3.49 |
/ EA |
UC607LFA |
|
|
1/2Barbx3/4FPT Adapter
1/2" Brass Barb x 3/4" Female Pipe Thread, Lead Free, Pex Adapter, For Use With Pex Tubing & Connected With Stainless Steel Cinch Clamps & Cinch Tool TV# 608-743, ASTM F-876, ASTM F-877 To SDR-9 Dimensional Standards, NSF 14 & 61 For Use In Potable Water Systems, CSA B137.5 Standards, NSF CL-R Certified For Use In Hot Water Systems Where Chlorinated 140 Degrees Fahrenheit Hot Water Can Be Constantly Re-Circulated, The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 1/4 Of 1 Percent, 0.25%, Of Lead By Weight, Meets AB1953 California & VT S152 Vermont Low Lead Restrictions.
View Details
|
122651 |
1/2Barbx3/4FPT Adapter |
4 |
3.99 |
/ EA |
UC068LFA |
|
|
1/2x1/2Fem SWT Adapter
1/2" Brass Pex Barb x 1/2" Female, Lead Free, Sweat Adapter, Makes A Sweat Transition From Copper Pipe To Pex Tubing & Connected With Stainless Steel Cinch Clamps & Cinch Tool TV #608-743, ASTM F-876, ASTM F-877 To SDR-9 Dimensional Standards, NSF 14 & 61 For Use In Potable Water Systems, CSA B137.5 Standards, NSF CL-R Certified For Use In Hot Water Systems Where Chlorinated 140 Degrees Fahrenheit Hot Water Can Be Constantly Re-Circulated, The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 1/4 Of 1 Percent, 0.25%, Of Lead By Weight, Meets AB1953 California & VT S152 Vermont Low Lead Restrictions.
View Details
|
122653 |
1/2x1/2Fem SWT Adapter |
11 |
3.79 |
/ EA |
UC600LFA |
|
|
1/2Barbx1/2FPT EarElbow
1/2" Brass Pex Barb x 1/2" Female Pipe Thread, Lead Free, Drop Ear Elbow, For Use With Pex Tubing & Connected With Stainless Steel Cinch Clamps & Cinch Tool TV #608-743, ASTM F-876, ASTM F-877 To SDR-9 Dimensional Standards, NSF 14 & 61 For Use In Potable Water Systems, CSA B137.5 Standards, NSF CL-R Certified For Use In Hot Water Systems Where Chlorinated 140 Degrees Fahrenheit Hot Water Can Be Constantly Re-Circulated, The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 1/4 Of 1 Percent, 0.25%, Of Lead By Weight, Meets AB1953 California & VT S152 Vermont Low Lead Restrictions.
View Details
|
122654 |
1/2Barbx1/2FPT EarElbow |
13 |
8.49 |
/ EA |
UC334LFA |
|
|
1/2x1/2x3/4Barb Pex Tee
1/2" x 1/2" x 3/4", Brass, Lead Free, Barb Pex Tee, Makes A 3/4" Branch Off A 1/2" x 1/2" Run For Use With Pex Tubing & Connected With Stainless Steel Cinch Clamps & Cinch Tool TV #608-743, ASTM F-876, ASTM F-877 To SDR-9 Dimensional Standards, NSF 14 & 61 For Use In Potable Water Systems, CSA B137.5 Standards, NSF CL-R Certified For Use In Hot Water Systems Where Chlorinated 140 Degrees Fahrenheit Hot Water Can Be Constantly Re-Circulated, The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 1/4 Of 1 Percent, 0.25%, Of Lead By Weight, Meets AB1953 California & VT S152 Vermont Low Lead Restrictions.
View Details
|
122658 |
1/2x1/2x3/4Barb Pex Tee |
2 |
4.49 |
/ EA |
UC408LFA |
|
|
1/2Barbx1/4 Drain Valve
1/2" Chrome Plated Barb Insert x 1/4" OD, Lead Free, Needle Valve Drain Valve, Use With TV #608-933 Cinch Clamps, Need Cinch Tool TV #608-743 Or Copper Crimp Rings On Cross Link Polyethylene Pex Tubing, After Crimping You Can Test Each Fitting To Well Over 100 PSI, NSF Listed Brass Inserts, ASTM F-876, ASTM F-877 To SDR-9 Dimensional Standards, NSF 14 & 61 For Use In Potable Water Systems, CSA B137.5 Standards, NSF CL-R Certified For Use In Hot Water Systems Where Chlorinated 140 Degrees Fahrenheit Hot Water Can Be Constantly Re-Circulated, The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 1/4 Of 1 Percent, 0.25%, Of Lead By Weight, Meets AB1953 California & VT S152 Vermont Low Lead Restrictions.
View Details
|
122662 |
1/2Barbx1/4 Drain Valve |
3 |
9.99 |
/ EA |
23056LF |
|
|
3/4Barbx1/2MPT Adapter
3/4" Brass Barb x 1/2" Male Pipe Thread, Lead Free, Pex Adapter, For Use With Pex Tubing & Connected With Stainless Steel Cinch Clamps & Cinch Tool TV #608-743, ASTM F-876, ASTM F-877 To SDR-9 Dimensional Standards, NSF 14 & 61 For Use In Potable Water Systems, CSA B137.5 Standards, NSF CL-R Certified For Use In Hot Water Systems Where Chlorinated 140 Degrees Fahrenheit Hot Water Can Be Constantly Re-Circulated, The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 1/4 Of 1 Percent, 0.25%, Of Lead By Weight, Meets AB1953 California & VT S152 Vermont Low Lead Restrictions.
View Details
|
122665 |
3/4Barbx1/2MPT Adapter |
2 |
3.79 |
/ EA |
UC138LFA |
|
|
3/4x3/4Male SWT Adapter
3/4" Brass Pex Barb x 3/4" Male, Lead Free, Sweat Adapter, Makes A Sweat Transition From Copper Pipe To Pex Tubing & Connected With Stainless Steel Cinch Clamps & Cinch Tool TV #608-743, ASTM F-876, ASTM F-877 To SDR-9 Dimensional Standards, NSF 14 & 61 For Use In Potable Water Systems, CSA B137.5 Standards, NSF CL-R Certified For Use In Hot Water Systems Where Chlorinated 140 Degrees Fahrenheit Hot Water Can Be Constantly Re-Circulated, The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 1/4 Of 1 Percent, 0.25%, Of Lead By Weight, Meets AB1953 California & VT S152 Vermont Low Lead Restrictions.
View Details
|
122667 |
3/4x3/4Male SWT Adapter |
3 |
4.49 |
/ EA |
UC608LFA |
|
|
3/4x3/4Fem SWT Adapter
3/4" Brass Pex Barb x 3/4" Female, Lead Free, Sweat Adapter, Makes A Sweat Transition From Copper Pipe To Pex Tubing & Connected With Stainless Steel Cinch Clamps & Cinch Tool TV #608-743, ASTM F-876, ASTM F-877 To SDR-9 Dimensional Standards, NSF 14 & 61 For Use In Potable Water Systems, CSA B137.5 Standards, NSF CL-R Certified For Use In Hot Water Systems Where Chlorinated 140 Degrees Fahrenheit Hot Water Can Be Constantly Re-Circulated, The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 1/4 Of 1 Percent, 0.25%, Of Lead By Weight, Meets AB1953 California & VT S152 Vermont Low Lead Restrictions.
View Details
|
122668 |
3/4x3/4Fem SWT Adapter |
4 |
4.49 |
/ EA |
UC606LFA |
|
