|
1/2x1/2Barb Str Stop
1/2" Barb Insert x 1/2" Barb Insert, Chrome Plated Brass, Lead Free, Straight Stop, Oval Handle, Use With TV #608-933 Cinch Clamps, Need Cinch Tool TV #608-743, Or Copper Crimp Rings On Cross Link Polyethylene Pex Tubing, After Crimping You Can Test Each Fitting To Well Over 100 PSI, NSF Listed Brass Inserts, ASTM F-876, ASTM F-877 To SDR-9 Dimensional Standards, NSF 14 & 61 For Use In Potable Water Systems, CSA B137.5 Standards, NSF CL-R Certified For Use In Hot Water Systems Where Chlorinated 140 Degrees Fahrenheit Hot Water Can Be Constantly Re-Circulated, The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 1/4 Of 1 Percent, 0.25%, Of Lead By Weight, Meets AB1953 California & VT S152 Vermont Low Lead Restrictions.
View Details
|
122659 |
1/2x1/2Barb Str Stop |
3 |
9.49 |
/ EA |
23063LF |
|
|
1/2Barbx3/8OD ANG Stop
1/2" Barb Insert x 3/8" OD Compression Angle Stop, Chrome Plated Brass, Lead Free, 1/4 Turn, Oval Handle, Use With TV #608-933 Cinch Clamps, Need Cinch Tool TV #608-743, Or Copper Crimp Rings On Cross Link Polyethylene Pex Tubing, After Crimping You Can Test Each Fitting To Well Over 100 PSI, NSF Listed Brass Inserts, ASTM F-876, ASTM F-877 To SDR-9 Dimensional Standards, NSF 14 & 61 For Use In Potable Water Systems, CSA B137.5 Standards, NSF CL-R Certified For Use In Hot Water Systems Where Chlorinated 140 Degrees Fahrenheit Hot Water Can Be Constantly Re-Circulated, The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 1/4 Of 1 Percent, 0.25%, Of Lead By Weight, Meets AB1953 California & VT S152 Vermont Low Lead Restrictions.
View Details
|
122660 |
1/2Barbx3/8OD ANG Stop |
5 |
9.49 |
/ EA |
23058LF |
|
|
1/2Barbx1/2MPT Str Stop
1/2" Barb Insert x 1/2" Male Pipe Thread, Chrome Plated Brass, Lead Free, Straight Stop, 1/4 Turn, Lever Handle, Use With TV #608-933 Cinch Clamps, Need Cinch Tool TV #608-743, Or Copper Crimp Rings On Cross Link Polyethylene Pex Tubing, After Crimping You Can Test Each Fitting To Well Over 100 PSI, NSF Listed Brass Inserts, ASTM F-876, ASTM F-877 To SDR-9 Dimensional Standards, NSF 14 & 61 For Use In Potable Water Systems, CSA B137.5 Standards, NSF CL-R Certified For Use In Hot Water Systems Where Chlorinated 140 Degrees Fahrenheit Hot Water Can Be Constantly Re-Circulated, The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 1/4 Of 1 Percent, 0.25%, Of Lead By Weight, Meets AB1953 California & VT S152 Vermont Low Lead Restrictions.
View Details
|
122661 |
1/2Barbx1/2MPT Str Stop |
1 |
9.49 |
/ EA |
23061LF |
|
