|
1250PK 5/16" HD Staple
1250 Pack, 5/16" Heavy Duty Staple, Narrow Crown, Fits Master Mechanic: #M5100, #M5000, #M5500, Arrow: T50, T50X, HT50, All T50 Series Staplers.
View Details
|
137364 |
1250PK 5/16" HD Staple |
5 |
4.99 |
/ EA |
50524 |
|
|
Vert Pump Switch
Parts 20 Vertical Style Pump Switch, For Use In Narrow Sump Or Shallow Sump Pits, Simple Piggyback Plug Makes Easy Electrical Connection, Includes Mounting Bracket.
View Details
|
137383 |
Vert Pump Switch |
1 |
97.99 |
/ EA |
FPS17-66 |
|
|
Qt Voc Lacquer Thinner
QT, VOC Compliant, Lacquer Thinner, Recommended For Use As A General Purpose Lacquer Thinner For Most Nitro Cellulose Based Lacquers, Read Instructions On Container Of Lacquer To Confirm Compatibility, Cleans Brushes & Equipment After Using Most Nitro Cellulose Lacquers, Compliant With SCAQMD Regulations As Of 11/15/10, Under 25 Gram Per Liter.
View Details
|
137390 |
Qt Voc Lacquer Thinner |
5 |
12.99 |
/ EA |
47732 |
|
|
1250PK 3/8" HD Staple
1250 Pack, 3/8" Heavy Duty Staple, Fits Master Mechanic: #M5100, #M5000, #M5500, Arrow T50, T50X, Ht50, All T50 Series Staplers.
View Details
|
137406 |
1250PK 3/8" HD Staple |
7 |
4.99 |
/ EA |
50624 |
|
|
110PC Accessory Kit
Dremel 110-Piece Super Accessory Kit. Use to cut, grind, sand, sharpen, polish, clean & carve. Includes: 1 each of the following: 1-1/4" cut off wheel, 3/4" carbon steel brush, polishing compound, silicon carbide grinding stone, high speedcutter, 1/2" 60G sanding drum with mandrel, 1/4" 60G sanding band with mandrel, wrench, aluminum oxide grinding stone, silicone carbide grinding stone, aluminum oxide grinding stone, 1-1/4" fiberglass reinforced cut off wheel, cone polishing tip, dressing stone, bristle brush, 180G abrasive buff, (2) mandrels, (4) 1" felt polishing wheel, (12) 15/16" emery cut off wheel, (12) 15/16" heavy duty emery cut off wheel, (4) small felt wheel, (6) 1/2" 60G sanding band, 12 each 3/4"sanding disc: 180G, 220G & 240G, (6) 1/4" 60G sanding band, 1/2" 120G sanding band & (6) 1/4" 120G sanding band.
View Details
|
137447 |
110PC Accessory Kit |
1 |
25.99 |
/ EA |
709-02 |
|
|
MG LB Bloom Booster
Miracle-Gro, LB, 10-52-10, Water Soluble Bloom Booster, Promotes Big Plants & Beautiful Blooms, Double Feeding Action, Feeds Through Both The Roots & The Leaves, Safe For Your Plants, Guaranteed Not To Burn When Used As Directed, Starts To Work Instantly, Promotes Quick, Beautiful Results.
View Details
|
137512 |
MG LB Bloom Booster |
3 |
7.49 |
/ EA |
2360011 |
|
|
65W 3Port Wall Charger
DEWALT 65W 3-Port GaN Charger. It is the ultimate Jobsite charger for all your fast charging needs. It is designed to provide lightning-fast charging for laptops and phones. With its powerful 65W output, this high-powered charger ensures efficient and reliable charging every time. The compact design makes it perfect for travel, while the 2 Type C and 1 USB ports allow you to charge multiple devices simultaneously. Upgrade to the DEWALT 65W GaN Charger and experience the convenience of fast charging in a compact package.
View Details
|
137522 |
65W 3Port Wall Charger |
2 |
45.99 |
/ EA |
131 0869 DW2 |
|
|
1/2Barbx1/2MPT Adapter
1/2" Lead Free Brass Barb Insert x 1/2" Male Pipe Thread Adapter, For Connecting 1/2" Cross Link Polyethylene Pex Tubing To 1/2" Female Iron Pipe Thread Pipe End Or Fitting, Secure Fittings To Pex Pipe With TV #608-933 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
View Details
|
137584 |
1/2Barbx1/2MPT Adapter |
3 |
3.89 |
/ EA |
UC120LFA |
|
|
1/2" Barb BRS Coupling
1/2", Lead Free Brass Barb Insert Coupling, For Connecting 2 Pieces Of 1/2" Cross Link Polyethylene Pex Tubing, Secure Barb Ends Of Fittings To Pex Pipe With TV #608-933 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
View Details
|
137585 |
1/2" Barb BRS Coupling |
3 |
2.79 |
/ EA |
UC008LFA |
|
|
1/2Barbx1/2FPT Adapter
1/2" Lead Free Brass Barb Insert x 1/2" Female Pipe Thread Adapter, For Connecting 1/2" Cross Link Polyethylene Pex Tubing To 1/2" Male Iron Pipe Thread Pipe End Or Fitting, Secure Barb End Of Fitting To Pex Pipe With TV #608-933 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
View Details
|
137586 |
1/2Barbx1/2FPT Adapter |
8 |
3.89 |
/ EA |
UC072LFA |
|
|
1/2Barbx3/4MPT Adapter
1/2" Lead Free Brass Barb Insert x 3/4" Male Pipe Thread Adapter, For Connecting 1/2" Cross Link Polyethylene Pex Tubing To 3/4" Female Iron Pipe Thread Pipe End Or Fitting, Secure Barb End Of Fitting To Pex Pipe With TV #608-933 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
View Details
|
137587 |
1/2Barbx3/4MPT Adapter |
3 |
5.49 |
/ EA |
UC116LFA |
|
|
1/2" BRS Barb Ins Elbow
1/2" Lead Free Brass Barb Insert Elbow, For Connecting 2 Pieces Of 1/2" Cross Link Polyethylene Pex Tubing At A 90 Degree Angle, Secure Barb Ends Of Fitting To Pex Pipe With TV #608-933 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
View Details
|
137590 |
1/2" BRS Barb Ins Elbow |
7 |
2.79 |
/ EA |
UC248LFA |
|
|
1/2Barbx1/2FPT Elbow
1/2" Lead Free Brass Barb Insert x 1/2" Female Pipe Thread Swivel Plastic Nut Faucet Adapter Elbow, For Connecting 1/2" Cross Link Polyethylene Pex Tubing At A 90 Degree Angle To 1/2" Male Iron Pipe Thread Faucet Shank, Secure Barb End Of Fitting To Pex Pipe With TV #608-933 Cinch Clamps & TV # 608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
View Details
|
137591 |
1/2Barbx1/2FPT Elbow |
7 |
6.79 |
/ EA |
UC532LFA |
|
