|
2CTSM Design Hook/Strip
Command, 2 Count, Small Designer Hooks & Strips, Mounting Solution That Holds Firmly & Removes Cleanly, They Leave No Surface Damage & Are Reusable, Creating An Easy & Affordable Way To Organize & Decorate, Each Hook Holds Up To 45G, Contains 2 Hooks & 4 Strips Per Pack.
View Details
|
630162 |
2CTSM Design Hook/Strip |
4 |
4.99 |
/ EA |
17082ES |
|
|
LG Design Hook/Strip
Command, 1.575" x 4.173" x 1.378", Large Designer Hooks & Strips, Mounting Solution That Holds Firmly & Removes Cleanly, Command, Strips Leave No Surface Damage & The Hooks Are Reusable, Creating An Easy & Affordable Way To Organize & Decorate! Each Hook Holds Up To 5 LB, Contains 1 Hook, 2 Strips Per Pack.
View Details
|
630176 |
LG Design Hook/Strip |
4 |
4.79 |
/ EA |
17083ES |
|
|
26 Leaf Feeler Gauge
26 Leaf Feeler Gauge, 3" Straight Leaves Etched With Both Metric & English Units Ranging From .0015" To .025" & .037 mm To .65 mm, Set Is Housed In A Protective Holder To Preserve The Trueness Of The Leaf Edges.
View Details
|
630387 |
26 Leaf Feeler Gauge |
1 |
10.99 |
/ EA |
230 |
|
|
Frac Drill Gauge
Fraction Drill Gauge, Stainless Steel Gage Conveniently Identifies Drill Bit Sizes From 1/16" To 1/2" x 64 THS, Etched Graduations Are Filled In Black To Give High Contrast & Will Not Wear Off, Gage Measures 2-3/8" x 6-3/4" Overall, Stainless Steel Will Not Rust.
View Details
|
630437 |
Frac Drill Gauge |
1 |
8.79 |
/ EA |
24 |
|
|
Protractor/ANG Finder
Protractor/Angle Finder, Use To Measure & Mark The Degree Of An Angle On Outside, Inside & Sloped Angles, Fine Black Graduations From 0 Degree To 80 Degree In Opposite Directions, Brass Lock Nut.
View Details
|
630445 |
Protractor/ANG Finder |
1 |
7.99 |
/ EA |
29 |
|
|
180G ANG Sand Sponge
Sandblaster, 180 Grit Dual Angled Detail Sanding Sponge, Ideal For Drywall Corners, Use For Drywall Finishing & Bare Surfaces Sanding On Wood & Metal, Use On Flat Surfaces As Well As Detail Or Hard To Reach Areas, Cuts 3 Times Faster & Lasts 3 Times Longer Than Standard Conventional Sponges, Clog Resistant.
View Details
|
630493 |
180G ANG Sand Sponge |
8 |
6.49 |
/ EA |
9564 |
|
|
6" Precis SS Rule
6" Flexible Stainless Steel Rule, With MM & 16 THS On 1 Side.
View Details
|
630514 |
6" Precis SS Rule |
2 |
3.99 |
/ EA |
305ME |
|
|
24" Mech Pick Up Tool
24" Mechanical Pick Up Tool, Strong 4 Prong Steel Jaws Retrieve Small Items From Hard To Reach Places, 24",60CM Reach, Smooth Actuator For Greater Control, Chrome Finish To Prevent Rust, Flexible Shaft To Avoid Obstacles.
View Details
|
630563 |
24" Mech Pick Up Tool |
1 |
7.29 |
/ EA |
396 |
|
|
Sharp Pointed Tweezer
Strong Sharp Pointed End Tweezer, Made With Precision Steel, 4-1/2" Overall Length.
View Details
|
630894 |
Sharp Pointed Tweezer |
2 |
8.29 |
/ EA |
401XX |
|
|
1-5/16" Inspo ORB Knob
Inspirations 1-5/16 in (33 mm) Diameter Oil-Rubbed Bronze Cabinet Knob
View Details
|
630903 |
1-5/16" Inspo ORB Knob |
6 |
6.99 |
/ EA |
BP1586ORB |
|
|
.093x1/4x12 BRS Strip
.093" x 1/4" x 12" Length, Brass Strip.
View Details
|
630905 |
.093x1/4x12 BRS Strip |
1 |
3.99 |
/ EA |
8225 |
|
|
3" Inspo ORB Pull
Inspirations 3 in (76 mm) Center-to-Center Oil-Rubbed Bronze Cabinet Pull
View Details
|
630964 |
3" Inspo ORB Pull |
9 |
7.49 |
/ EA |
BP1590ORB |
|
|
FLT Leg Divider
Flat Leg Divider, Forged Of Special Steel, 6" Point To Point Measurement, Hardened & Tempered Bow Springs & Fulcrum Spools Assure Uniform Tension Without Side Play, Adjusting Screw Has A Self Seating Washer & Nut To Permit Quick & Positive Adjustment, Meets Government Specifications GGG-C-95.
View Details
|
631146 |
FLT Leg Divider |
1 |
16.99 |
/ EA |
450-6 |
|
|
Swiv Deburring Tool
Swivel Deburring Tool, 5" Aluminum Handle, 2 Changeable Blades.
View Details
|
631195 |
Swiv Deburring Tool |
1 |
16.99 |
/ EA |
482 |
|
