Searching Catalog
Clearweld, 25 ml, Quick Setting 5 Minute Epoxy Adhesive Syringe, Sets In 5 Minutes & Cures In 1 Hour, Strength Is At 3200 PSI, Multi Purpose Use: Tile, Ceramic, Glass, Wood, Most Plastics & More, Features No Mess, No Waste Cap.
JB Weld, 3 OZ, Extreme Heat Hi Temp Resistant Paste, Epoxy Putty Specifically Formulated To Bond & Repair Materials That Will Be Exposed To High Temperatures In Automotive & Industrial Maintenance Applications, Cures To A Tough Hard Bond With Little To No Shrinkage, Sets In 1 Hour At Room Temperature, After 8 Hours It Can Be Drilled, Tapped, Machined, Ground, Filed & Painted, Withstands Temperatures Up To 2,400 Degrees Fahrenheit, Files Cracks & Holes In Metal Surfaces.
2 OZ J-B KwickWeld Tube, Fast Set Cure Version, Sets In 4 Minutes & Fully Cure In 4-6 Hours, Waterproof, Petroleum, Chemical & Acid Resistant Once Fully Cured, Non-Toxic, Temperature Resistant Up To 300 Degrees, Can Be Used On Almost Any Surface, Bronze, Porcelain, Ceramic, Marble, Glass, Wood, Concrete, Fiberglass, Steel, Iron, Copper, Aluminum, ABS & PVC Plastics, When Fully Cured Can Be Drilled, Tapped, Machined, Filed, Sanded & Painted.
Cold Weld, 2 OZ, Original Adhesive Compound , It Works On Just About Any Surface Including Iron, Steel, Copper, Aluminum, Brass, Bronze, Pewter, Porcelain, Ceramic, Marble, Glass, Concrete, Fiberglass, Wood & Most Plastics, Just Squeeze Equal Parts From The 2 Separate 1 OZ Tubes Onto A Mixing Surface & Mix Thoroughly With A Putty Knife Or Similar Tool, Cures In 24 Hours & When Cured It Will Withstand Temperatures Of 600 Degrees, Waterproof, Petroleum, Chemical & Acid Resistant, Can Be Drilled, Tapped, Machined, Filed, Sanded & Painted, With A Tensile Strength Of 3960 PSI, Perfect Solution For Any Heavy Duty Adhesive Job, Tube.
Water Weld Auto, 2 OZ, Epoxy Putty, Plugs Holes & Make Permanent Repairs In Moist Surface Or Under Water Applications, Waterweld Will Even Repair Leaking Fuel Tanks, Pull Off The Amount Needed For Job & Knead With Fingers Until Thoroughly Mixed, Then Push Product Into Hole, Cures In 20 To 30 Minutes & Can Be Drilled, Sanded, Filed, Tapped, Machined & Painted, Non-Toxic & Approved For Use With Potable Water, Use On Auto, Ceramic, Epoxy Putty Sticks, Fiberglass, Metal, Plastic/Composite/PVC & More.
