Current Store H. HOUST & SON INC

Manufacturer: WELD, J.B.     

Searching Catalog

OZ Kwik WD Epoxy Putty

OZ, Kwik Wood Hand Mixable Epoxy Putty, It Provides A Fast, Permanent Repair To All Interior & Exterior Wood Surfaces, Ideal For Damaged Or Rotted Sections Of Wood On Doors, Windows, Fences, Shutters, Furniture & More, Kwik Wood Becomes An Integral Part Of The Item Being Repaired & Will Not Shrink, Rot, Crack Or Pull Away, It Sets Quickly & Can Be Machined, Drilled, Tapped, Sanded, Filed & Painted In 1 Hour.

ClearWeld 25 ml Syringe

Clearweld, 25 ml, Quick Setting 5 Minute Epoxy Adhesive Syringe, Sets In 5 Minutes & Cures In 1 Hour, Strength Is At 3200 PSI, Multi Purpose Use: Tile, Ceramic, Glass, Wood, Most Plastics & More, Features No Mess, No Waste Cap.

32OZ WD Restore Putty

32 OZ, Wood Restore Repair Putty Wood Filler, Provides A Permanent Repair To Damaged & Rotted Wood, Professional Strength Formula Is Ideal For Interior & Exterior Wood Projects, Use To Fill In Small Cracks Or Large Holes, Provides A Hard Workable Surface In 15 Minutes, Will Not Shrink, Crack Or Split, Can Be Shaped, Sanded, Drilled, Carved, Screwed & Painted, Ideal For Rebuilding Frames, Securing Joints Or Anchoring Screws.

3OZ Extreme Heat Paste

JB Weld, 3 OZ, Extreme Heat Hi Temp Resistant Paste, Epoxy Putty Specifically Formulated To Bond & Repair Materials That Will Be Exposed To High Temperatures In Automotive & Industrial Maintenance Applications, Cures To A Tough Hard Bond With Little To No Shrinkage, Sets In 1 Hour At Room Temperature, After 8 Hours It Can Be Drilled, Tapped, Machined, Ground, Filed & Painted, Withstands Temperatures Up To 2,400 Degrees Fahrenheit, Files Cracks & Holes In Metal Surfaces.

2OZ J-B KwickWeld Tube

2 OZ J-B KwickWeld Tube, Fast Set Cure Version, Sets In 4 Minutes & Fully Cure In 4-6 Hours, Waterproof, Petroleum, Chemical & Acid Resistant Once Fully Cured, Non-Toxic, Temperature Resistant Up To 300 Degrees, Can Be Used On Almost Any Surface, Bronze, Porcelain, Ceramic, Marble, Glass, Wood, Concrete, Fiberglass, Steel, Iron, Copper, Aluminum, ABS & PVC Plastics, When Fully Cured Can Be Drilled, Tapped, Machined, Filed, Sanded & Painted.

FiberWeld 2" Pipe Cast

J-B Weld FiberWeld 2" pipe repair cast. Water-activated fiberglass wrap that acts as a high-strength adhesive & fiberglass in one. Works on pipes up to 2 inch in diameter. Easy to use, simply wet, apply and done. Hardens like steel in 15 minutes and holds household water pressure. Built with FiberFix technology. Great for repairs on copper, cast iron, PVC, ABS, galvanized steel, rubber and more. Kit contains one 2" x 60" repair cast, one pair of gloves, one securing bandage,and 1 oz. of epoxy putty

Cold Weld 2OZ Adhesive

Cold Weld, 2 OZ, Original Adhesive Compound , It Works On Just About Any Surface Including Iron, Steel, Copper, Aluminum, Brass, Bronze, Pewter, Porcelain, Ceramic, Marble, Glass, Concrete, Fiberglass, Wood & Most Plastics, Just Squeeze Equal Parts From The 2 Separate 1 OZ Tubes Onto A Mixing Surface & Mix Thoroughly With A Putty Knife Or Similar Tool, Cures In 24 Hours & When Cured It Will Withstand Temperatures Of 600 Degrees, Waterproof, Petroleum, Chemical & Acid Resistant, Can Be Drilled, Tapped, Machined, Filed, Sanded & Painted, With A Tensile Strength Of 3960 PSI, Perfect Solution For Any Heavy Duty Adhesive Job, Tube.

WaterWeld 2OZ Putty

Water Weld Auto, 2 OZ, Epoxy Putty, Plugs Holes & Make Permanent Repairs In Moist Surface Or Under Water Applications, Waterweld Will Even Repair Leaking Fuel Tanks, Pull Off The Amount Needed For Job & Knead With Fingers Until Thoroughly Mixed, Then Push Product Into Hole, Cures In 20 To 30 Minutes & Can Be Drilled, Sanded, Filed, Tapped, Machined & Painted, Non-Toxic & Approved For Use With Potable Water, Use On Auto, Ceramic, Epoxy Putty Sticks, Fiberglass, Metal, Plastic/Composite/PVC & More.