CROSS LINKED POLYETHYLENE (QEST)

Back

38 found, showing page 1 of 3
1/2Barbx1/4 Drain Valve

1/2" Chrome Plated Barb Insert x 1/4" OD, Lead Free, Needle Valve Drain Valve, Use With TV #608-933 Cinch Clamps, Need Cinch Tool TV #608-743 Or Copper Crimp Rings On Cross Link Polyethylene Pex Tubing, After Crimping You Can Test Each Fitting To Well Over 100 PSI, NSF Listed Brass Inserts, ASTM F-876, ASTM F-877 To SDR-9 Dimensional Standards, NSF 14 & 61 For Use In Potable Water Systems, CSA B137.5 Standards, NSF CL-R Certified For Use In Hot Water Systems Where Chlorinated 140 Degrees Fahrenheit Hot Water Can Be Constantly Re-Circulated, The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 1/4 Of 1 Percent, 0.25%, Of Lead By Weight, Meets AB1953 California & VT S152 Vermont Low Lead Restrictions.

122662
2



10PK 3/4" J Pipe Hanger

10 Pack, 3/4", J Hook Pipe Hanger, Used To Attach Pex, Copper, CPVC & Polybutylene Pipe To Floors Or Joists.

205397
2



10PK 1/2"J Hook Hanger

10 Pack, 1/2", J Hook Pipe Hanger, Used To Attach Pex, Copper, CPVC & Polybutylene Pipe To Floors Or Joists.

205399
3



3/4x1 Pex Barb Coupling

3/4" x 1", Sharkbite RT Pex Barb Reducing Coupling, Made Of Lead Free DZR Brass, Easy To Install, Allows For You To Reduce Pipe Size With 1 Fitting, Compatible With Potable Water Distribution & Hydronic Heating Applications, Can Be Used InBoth Stainless Steel Clamp Systems Or A Copper Crimping System, ASTM F1807, SNF/ANSI 61, NSF 372 Approvals.

239580
2



1/2x1/2Evo Coupling

1/2" x 1/2"D, Sharkbite Evopex Push Coupling, Pex Only Push To Connect Rough In Plumbing Solution Designed To Use Without The Need For Additional Tools & Rings, No Special Tools, Soldering, Glue Or Crimping To Plumb An Entire Home, ReducesThe Risk Of Install Errors & Potential Leaks, Just Push Onto Pex Pipe & Check The Green Visual Indicator To Ensure A Proper, Leak Free Connection, Made From Acudel Plastic, Provides Toughness & Chemical Resistance Along With Excellent Anti-Decay Stability & Dimensional Stability.

253631
3



3/4x3/4Evo Coupling

3/4" x 3/4"D, Sharkbite Evopex Push Only To Connect Coupling, Designed To Use Without The Need For Additional Tools & Rings, No Special Tools, Soldering, Glue Or Crimping To Plumb An Entire Home, Reduces The Risk Of Install Errors & Potential Leaks, Just Push Onto Pex Pipe & Check The Green Visual Indicator To Ensure A Proper, Leak Free Connection, Made From Acudel Plastic, Provides Toughness & Chemical Resistance Along With Excellent Anti-Decay Stability & Dimensional Stability.

253632
2



3/4x1/2Evo Red Coupling

3/4" x 1/2", Evopex Push To Connect Reducing Coupling, High Performance Polymer With Great Chemical & Chloramine Resistance, No Tools, No Calibration, No Rings For Error Proof Installation, Can See Visual Indicator For Assurance Of Proper Fitting Connection, Easy Install, No Potential For Leaks Caused By Nicks On The Fitting Exterior, 200 Degrees Maximum Temperature, 160 PSI, Listed By IAPMO & Design Certified & Listed To ASSE 1061, NSF 61, Meets All UPC, IPC & CUPC Requirements, No De Mount Clip Required, Not Meant To Be Removed Once Installed.

253633
2



1/2" Evo Fem Connector

1/2" Push x 1/2" FNPT, Evopex Female Connector, A Fast & Easy Way To Connect Pipe Without The Need For Special Tools, Glue Or Soldering, Used For Connecting A Tube To A Male Thread, Lead Free, Bagged.

253634
1



3/4" Evo Fem Connector

3/4" Push x 3/4" FNPT, Evopex Female Connector, A Fast & Easy Way To Connect Pipe Without The Need For Special Tools, Glue Or Soldering, Used For Connecting A Tube To A Male Thread, Lead Free, Bagged.

253635
2



1/2" Evo Male Connector

1/2" Push x 1/2" MPT, Evopex Push To Connect Male Connector, 200 Degrees Fahrenheit, 160 PSI Maximum Pressure, Lead Free, Pex Compatible Pipe Material, For Water Supply, Bagged.

253636
2



3/4" Evo Male Connector

3/4" Push x 3/4" MPT, Evopex Push To Connect Male Connector, 200 Degrees Fahrenheit, 160 PSI Maximum Pressure, Lead Free, Pex Compatible Pipe Material, For Water Supply, Bagged.

253637
4



1/2" 90DEG Evo Elbow

1/2" x 1/2", 90 Degree, Evopex Push To Connect Elbow, Fast & Easy Way To Connect Pipe Without The Need For Special Tools, Glue Or Soldering, 200 Degrees Fahrenheit, 160 PSI Maximum Pressure, Lead Free, Pex Compatible Pipe Material, For Water Supply, Bagged.

253638
2



3/4" 90DEG Evo Elbow

3/4" x 3/4", 90 Degree, Evopex Push To Connect Elbow, Fast & Easy Way To Connect Pipe Without The Need For Special Tools, Glue Or Soldering, 200 Degrees Fahrenheit, 160 PSI Maximum Pressure, Lead Free, Pex Compatible Pipe Material, For Water Supply, Bagged.

253639
2



1/2"Push Connect Elbow

1/2" Push x 1/2" MPT, Evopex Push To Connect Elbow, Fast & Easy Way To Connect Pipe Without The Need For Special Tools,Glue Or Soldering, 200 Degrees Fahrenheit, 160 PSI Maximum Pressure, Lead Free, Pex Compatible Pipe Material, For WaterSupply, Bagged.

253640
4



1/2" 90DEG Evo Elbow

1/2" Push x 1/2" MPT, 90 Degree, Evopex Push To Connect Drop Ear Elbow, Fast & Easy Way To Connect Pipe Without The Need For Special Tools, Glue Or Soldering, 200 Degrees Fahrenheit, 160 PSI Maximum Pressure, Lead Free, Pex Compatible PipeMaterial, For Water Supply, Bagged.

253641
2



38 found, showing page 1 of 3